(Cat. No. I121-102 to I121-108)
|
MINI STRAIGHT PLATES FOR 2MM SCREWS
|
| Thickness: 0.9mm |
Width: 5mm |
| Hole Spacing: 6mm |
|
(Cat. No. I121-554 to I121-558)
|
DCP Plates - 2.0mm
|
| Thickness (4 to 6 Holes): 1mm |
Width: 5mm |
|
(7 & 8 Holes): 1.5mm |
Hole Spacing: 5mm |
|
(Cat. No. I122-101 Left & I122-102 Right)
|
MINI L PLATE FOR 2MM SCREWS
|
| Shaft with two holes & head
with two holes. |
| Thickness: 1mm |
Width: 5mm |
| Hole Spacing: 6mm |
|
(Cat. No. I123-100)
|
MINI T PLATE FOR 2MM SCREWS
|
| Shaft with two holes &
head with two holes. |
| Thickness: 1mm |
Width: 5mm |
| Hole Spacing: 6mm |
|
|
(Cat. No. I131-102 to I131-110)
|
QUARTER TUBULAR PLATE FOR 2.7mm SCREWS
|
| Thickness: 1mm |
Width: 7mm |
| Hole Spacing: 8mm |
|
(Cat. No. I132-102 to I132-112)
|
DCP PLATES - 2.7MM
|
| Thickness (upto 6 Holes): 2mm |
Width: 8mm |
|
(7 & 12 Holes): 2.5mm |
Hole Spacing: 8mm & 12mm |
|
(Cat. No. I133-101 Left & I133-102 Right)
|
L PLATES FOR 2.7MM SCREWS
|
| Shaft with two holes & head
with two holes. |
| Thickness: 1.2mm |
Width: 7mm |
| Hole Spacing: 8mm |
|
(Cat. No. I134-100)
|
T-PLATES FOR 2.7MM SCREWS
|
| Shaft with three holes &
head with two holes. |
| Thickness: 1.2mm |
Width: 7mm |
| Hole Spacing: 8mm |
|
|
(Cat. No. I135-102 to I135-124)
|
ST. RECONSTRUCTION PLATE FOR 2.7mm SCREWS
|
| Thickness: 3.1mm |
Width: 8mm |
| Hole Spacing: 8mm |
|
(Cat. No. I137-160 to I137-170)
|
CALCANEAL PLATE FOR3.5MM SCREWS
|
| For Calcaneus Franctures.
Fixation with 3.5mm and 4mm screws. |
| Thickness: 1.2mm |
Length: 60mm & 70mm |
|
(Cat. No. I138-102 to I138-112)
|
ONE THIRD TUBULAR PLATES
|
| Used as buttress plate for fibula,
metatarsals and metarcarpals. Fixation with 3.5 & 4mm screws.
Compression effect can be achieved by eccentric insertion of remote
screws. |
| Thickness: 1mm |
Width: 9mm |
| Hole Spacing: 12mm & 16mm
(One-third tube 12mm dia.) |
|
(Cat. No. I139-122 to I139-132)
|
ONE-THIRD TUBULAR PLATE WITH COLLAR
|
| Used as buttress plate for
fibula, metatarsals and metarcarpals. Fixation with 3.5 &
4mm screws. Compression effect can be achieved by eccentric insertion
of remote screws. |
| Thickness: 1mm |
Width: 9mm |
| Hole Spacing: 12mm & 16mm
(One-third tube 12mm dia.) |
|
(Cat. No. I140-102 to I140-112)
| DCP PLATES - 3.5MM |
| Thickness: 3.5mm |
Width: 10mm |
| Hole Spacing: 12mm & 16mm |
|
(Cat. No. I143-102 to I143-112)
|
SEMI TUBULAR PLATE FOR 3.5MM SCREWS
|
| Thickness: 1mm |
Width: 11mm |
| Hole Spacing: 16mm & 26mm |
|
(Cat. No. I141-103 to I141-106)
|
SMALL T-PLATES, RIGHT ANGLED
|
| For the Left and Right Radius.
Fixation with 3.5mm & 4mm screws. |
| Thickness: 1.2mm |
Width: 10mm |
| Head with three holes. |
|
(Cat. No. I142-103L to I142-106L & I142-103R to I142-106R)
|
SMALL T-PLATES, OBLIQUE ANGLED
|
| For the Left and Right Radius.
Fixation with 3.5mm & 4mm screws. |
| Thickness: 1.5mm |
Width: 10mm |
| Head with three holes. |
|
(Cat. No. I144-105 to I144-122)
|
3.5MM STRAIGHT PELVIC RECONSTRUCTION PLATES
|
| Do not bend more than
15° |
| Thickness: 2.8mm |
Width: 10mm |
| Hole Spacing: 12mm |
|
(Cat. No. I145-102 to I145-104)
|
Y-RECONSTRUCTION PLATES
|
Cat. No.
I145.102
I145.103
I145.104 |
Size
Small
Medium
Large |
No. of Holes
6 Holes
9 Holes
12 Holes |
|
(Cat. No. I146-103 to I146-112)
|
CLOVERLEAF PLATES
|
| For distal Intra-Articular
tibial Fractures. Fixation with 3.5mm & 4.0mm Screws. |
| Thickness: 2mm |
Width: 15.2mm |
| Cloverleaf Thickness: 12mm |
|
(Cat. No. I147-104 to I147-112)
|
LC-DCP PLATE FOR 3.5MM SCREWS
|
| For Ulna & Radius. Fixation
with 3.5mm & 4mm screws. |
| Thickness: 4mm |
Width: 11mm |
| Hole Spacing: 13mm |
|
(Cat. No. I148-104 to I148-110)
|
HOOK PLATE FOR 3.5MM SCREWS
|
Cat. No.
I148.104
I148.105
I148.106
|
No. of Holes
4 Holes
5 Holes
6 Holes
|
Cat. No.
I148.107
I148.108
I148.110
|
No. of Holes
7 Holes
8 Holes
10 Holes
|
|
(Cat. No. I149-105 to I149-122)
|
4.5 MM STRAIGHT RECONSTRUCTION PLATES
|
| Do Not Bend more than 15°.
Fixation with 4.5 & 6.5mm screws. |
| Thickness: 2.8mm |
Width: 12mm |
| Hole Spacing:16mm |
|
(Cat. No. I150-104 to I150-116)
|
LIMITED CONTACT DYNAMIC COMPRESSION PLATE (LC-DCP) FOR 4.5MM
SCREWS (NARROW)
|
| Fixation with 4.5 & 6.5mm
screws. Undercuts: For reduced vascular damage. The end holes can
be used for cancellous bone screws. The LC-DCP holes allow compression
in both directions of the longitudinal axis. Indication: As
a neutralisation and tension band plate on the tibia (not intended
for the femur). |
| Thickness: 4.6mm |
Width: 13.5mm |
| Hole Spacing: 18mm |
|
(Cat. No. I151-104 to I151-118)
LIMITED CONTACT DYNAMIC COMPRESSION PLATE
(LC-DCP) FOR 4.5MM SCREWS (BROAD)
|
| Fixation with 4.5 & 6.5mm
screws. Undercuts: For reduced vascular damage. The end holes
can be used for cancellous bone screws. The LC-DCP holes allow
compression in both directions of the longitudinal axis. Indication:
As a tension band plate on the Femur and for Humeral Pseudarthrosis
(not intended for the Tibia). |
| Thickness: 6mm |
Width: 17.5mm |
| Hole Spacing: 18mm |
|
(Cat. No. I152-130 to I152-180)
|
LENGTHENING PLATE, 4.5MM, NARROW, 8 HOLES
|
| Thickness: 3.6mm |
Width: 12mm |
| Hole Spacing: 12mm |
|
(Cat. No. I153-130 to I153-160)
|
LENGTHENING PLATE, 4.5MM, BROAD, 8 HOLES
|
| Thickness: 4.5mm |
Width: 16mm |
| Hole Spacing: 12mm |
|
(Cat. No. I154-150 to I154-220)
|
LENGTHENING PLATE, 4.5MM, BROAD, 10 HOLES
|
| Thickness: 4.5mm |
Width: 16mm |
| Hole Spacing: 12mm |
|
(Cat. No. I155-105 & I155-106)
|
SPOON PLATE
|
| Shaft with V-profile for the
fixation on the frontal edge of the tibia. Fixation with
4.5mm cortical screws. |
| Thickness: 3mm |
Head Width: 33mm |
|
(Cat. No. I156-104 to I156-112)
|
4.5MM SEMI-TUBULAR PLATES, HEAVY DUTY
|
| Fixation with 4.5 & 6.5mm
screws. A compression effect can be achieved by eccentric
positioning of the screws remote from the fracture line. |
| Thickness: 1mm |
Width: 11mm |
| Hole Spacing: 16mm & 26mm |
|
(Cat. No. I157-104 to I157-116)
|
4.5MM NARROW DCP PLATES
|
| Fixation with 4.5 & 6.5mm
screws. All holes are designed as self-compressing holes. All
the end holes are designed for cancellous bone screws. Indication:
As a neutralisation and tension band plate on the tibia (not intended
for the femur). |
| Thickness: 3.6mm |
Width: 12mm |
| Hole Spacing: 16 & 25mm |
|
(Cat. No. I158-104 to I158-120)
|
4.5MM BROAD DCP PLATES
|
| Fixation with 4.5 & 6.5mm
screws. All holes are designed as self-compressing holes. All the
end holes are designed for cancellous bone screws. Indication:
As a tension band plate on the femur and for humeral pseudoarthrosis
(not intended for the tibia). Use broad plates with six or seven
holes in exceptional cases only, e.g. on the humerus. |
| Thickness: 4.5mm |
Width: 16mm |
| Hole Spacing: 16mm & 25mm |
|
(Cat. No. I159-103 to I159-110)
|
T-PLATE FOR 4.5MM SCREWS
|
| Shaft with round profile,
for humeral and tibial head. Fixation with 4.5 & 6.5mm screws. |
| Thickness: 2mm |
Width: 17mm |
|
(Cat. No. I160-104 to I160-110)
| T-BUTTRESS PLATE FOR 4.5MM
SCREWS |
With double bend, as buttress
for tibial head fractures.
Fixation with 4.5mm & 6.5mm screws. |
| Thickness: 2mm |
Width: 17mm |
|
(Cat. No. I161-103R to I161-110R and I161-133L to I161-140L)
| L-BUTTRESS PLATE 4.5mm
FOR RIGHT & LEFT LEG |
With double bend, as buttress
for tibial and humeral head fractures.
Left angled for right leg & right angled for left leg. |
| Thickness: 2mm |
Width: 16mm |
|
(Cat. No. I162-011 to I162-094)
|
95º CONDYLAR PLATES (DCP)
|
| With DCP dynamic compression
holes and slot for tension device. All condylar plates have an angle
of 95° between blade and shaft. The two holes next to the blade
are suitable for 6.5mm cancellous bone screws, all other holes are
self-compressing holes. Fixation with 4.5mm cortical screws. For
fractures in the distal and proximal femoral region as well as for
intertrochanteric valgus osteotomy. |
| Thickness: 5.6mm |
Width: 16mm |
| Hole Spacing: 16mm |
U-profile Blade: 6.5x16mm |
| Shaft Length: 5 Holes = 92mm |
7 Holes = 124mm |
|
9 Holes = 156mm |
12 Holes = 204mm |
|
14 Holes = 236mm |
16 Holes = 268mm |
|
18 Holes = 300mm |
|
|
(Cat. No. I163-001 to I163-094)
|
130º ANGLED BLADE PLATES (DCP)
|
| With DCP dynamic compression
holes and slot for tension device (from 6 holes up). These plates
have an angle of 130° between blade and shaft. Fixation with
4.5mm cortical screws. For femoral neck and pertrochanteric fractures. |
| Thickness: 5.6mm |
Width: 16mm |
| Hole Spacing: 16mm |
U-profile Blade: 6.5x16mm |
| Shaft Length:4 Holes = 60mm |
6 Holes = 104mm |
|
9 Holes = 152mm |
12 Holes = 200mm |
|
(Cat. No. I164-007L to I164-015L and I164-107R to I164-115R)
CONDYLAR BUTTRESS PLATES
4.5mm FOR LEFT & RIGHT LEG
|
With DCP dynamic compression
holes and slot for tension device.
As buttress for the femoral condyles with multiple fragment fractures. |
| Thickness: 5mm |
Width: 16mm |
| Hole Spacing: 16mm |
|
(Cat. No. I165-005R to I165-013R and I165-105L to I165-113L)
LATERAL TIBIAL HEAD BUTTRESS PLATE
4.5 FOR LEFT & RIGHT LEG
|
Fixation with 4.5mm &
6.5mm screws shaft with DCP dynamic
compression holes and slot for tension device. Left angled for
right leg and right angled for left leg. |
| Thickness: 3.8mm |
Width: 14mm |
| Hole Spacing: 16mm |
|
(Cat. No. I166-104 to I166-108)
DHS BARREL DOUBLE ANGLED PLATES
DCP HOLE - 120°
|
With DCP dynamic compression
holes and slot for tension device.
Fixation with 4.5mm Cortical Screws. |
| Thickness: 5.4mm |
Width: 16mm |
| Hole Spacing: 16mm |
Barrel Length: 25mm |
|
(Cat. No. I166-004 to I166-712)
|
DHS BARREL PLATES WITH DCP &
ROUND HOLES - 130°, 135°, 140°, 145° &
150° |
With DCP dynamic compression
holes and slot for tension device. Fixation with 4.5mm cortical
screws.
For pertrochanteric and intertrochanteric fractures. |
| Thickness: 5.8mm |
Width: 19mm |
| Hole Spacing: 16mm |
Outer Barrel Dia: 12.6mm |
| Barrel Length: 38mm |
Short Barrel Length: 25mm |
|
(Cat. No. I167-006 to I167-022)
|
95º DCS PLATES DCP HOLES
|
With DCP dynamic compression
holes and slot for tension device.
Fixation with 4.5mm cortical screws.
For condylar fractures, avoids further damage to the bone. |
| Thickness: 5.4mm |
Width: 16mm |
| Hole Spacing: 16mm |
Barrel Length: 25mm |
|
(Cat. No. I169-015 to I169-060)
WAIN RIGHT PLATES
Cat. No.
I169.015
I169.020
I169.025
I169.030
|
No. Holes
3 Holes
3 Holes
3 Holes
3 Holes
|
Blade Sz.
45mm
50mm
55mm
60mm
|
|
Cat. No.
I169.045
I169.050
I169.055
I169.060
|
No. Holes
4 Holes
4 Holes
4 Holes
4 Holes
|
Blade Sz.
45mm
50mm
55mm
60mm
|
|
|
(Cat. No. I170-040 to I170-170)
| ANGLED BLADE PLATES FOR INTERTROCHANTERIC
FEMORAL OSTEOTOMIES IN ADULTS - 90° DCP HOLES |
| With DCP dynamic compression
holes and slot for tension device. Fixation with 4.5mm cortical
screws. The hole in the bend enables fixation of the calcar femors
with a long cortical screw. Blade Length Measured on the inside. |
| Thickness: 5.6mm |
Width: 16mm |
| U-Profile Blade: 6.5x16mm |
Displacement T |
|
(Cat. No. I171-060 to I171-185)
ANGLED BLADE PLATES FOR INTERTROCHANTERIC FEMORAL
OSTEOTOMIES IN ADULTS - 120° DCP HOLES
|
| With DCP dynamic compression
holes and slot for tension device. Fixation with 4.5mm cortical
screws. For repositioning osteotomies in the treatment of femoral
neck pseudarthroses and fracture. |
| Thickness: 5.6mm |
Width: 16mm |
| Hole Spacing: 16mm |
U-Profile Blade: 6.5x16mm |
|
(Cat. No. I176-104 to I176-112)
JEWETT NAIL PLATES - 135º |
(Cat. No. I177-104 to I177-114)
MACLAUGHLIN PLATES |
(Cat. No. I193-008 to I193-011)
|
COBRA HEAD PLATE - 4.5 MM
|
| Shaft with DCP dynamic compression
holes and slot for tension device. For arthrodesis of the hip. In
the two shaft holes next to the head, two 4.5mm cortical screws,
length 68mm, are normally used. |
| Thickness: 6mm |
Width: 16mm |
| Hole Spacing: 16mm |
|
|
(Cat. No. I194.000)
|
HOOK PLATE 4.5MM with DCP 6 HOLES
|
Fixation with 4.5mm Cortical
Screws.
Shaft with DCP dynamic compression holes and
slot for tension device. |
| Thickness: 6mm |
Width: 16mm |
|
(Cat. No. I198-010 to I198-050)
STEFFEE PLATES - 135º |
(Cat. No. I199-001 to I199-006)
H-PLATE FOR CERVICAL SPINE |
|
